RIGID CELLULAR PLASTICS COMPRESSION TEST FIXTURE

ASTM.D1621.10

Conical Shaped Tensile Grips

for Rigid Cellular Plastic (Type A)

ASTM.D1623.10

FLATWISE TENSION FIXTURE WITH 5 SETS OF 1” SQUARE  BONDING BLOCKS

ASTM.D1623.20

FLATWISE TENSION FIXTURE WITH 5 SETS OF 1" ROUND BONDING BLOCKS

ASTM.D1623.22

FLATWISE TENSION FIXTURE WITH 5 SETS OF 2" SQUARE BONDING BLOCKS

ASTM.D1623.30

Environmental Stress-Cracking

of Ethylene Plastics

ASTM.D1693.10

PHOTO COMING SOON

FREE FALLING DART IMPACTER FOR IMPACT RESISTANCE OF PLASTIC FILM

ASTM.D1709.10

IMPACTER FOR BRITTLENESS OF PLASTIC SHEETING

ASTM.D1790.10

Split Disk Fixture for

Composite Materials

ASTM.D2290.10

Split Disk Fixture for Plastic Materials

ASTM.D2290.20

Split Disk Fixture for

Plastic Materials

ASTM.D2290.21

High Strength (smaller Diameter) Split Disk Fixture for Plastic Materials

ASTM.D2290.30

High Strength Split Disk Fixture for Plastic Materials (4”- 12” Diameter)

ASTM.D2290.50

High Strength Split Disk Fixture for Plastic Materials (4”- 18” Diameter)

ASTM.D2290.51

High Strength Split Disk Fixture for Plastic Materials (8” DIAMETER AND UP)

ASTM.D2290.52

DROP WEIGHT IMPACT OF CYLINDRICAL STRUCTURAL MEMBERS AND PIPING SECTION

ASTM.D2444.20

TENSILE CREEP TESTING STAND - 5,000 LBS CAPACITY - 10 TO 1 MULTIPLIER

ASTM.D2990.12

(6) PosItion Tensile creep stand, low capacity, High elongation, Room  Temperature

ASTM.D2990.13

Three Point

Flexural Creep Stand

ASTM.D2990.21

(6) POSITION Multi-purpose CREEP TESTING STAND- DEAD WEIGHT (Flexure  Elevated Temperature)

ASTM.D2990.22

(6) PosItion Flexure creep stand, low capacity, Liquid

ASTM.D2990.23

(6) POSITION FLEXURE CREEP TESTING STAND, 4 to 1 multiplier

ASTM.D2990.24

15 to 1 multiplier - Single Position Compression with circulating bath - 1000 lbs

ASTM.D2990.30

THIN SHEET TENSILE LINE GRIPS (AL)

ASTM.D1593.10

DROP ARM IMPACTER FOR RIGID VINYL AT LOW-TEMPERATURES

ASTM.D1593.11

COMPACT TENSION CLEVIS GRIP SET (SS)

ASTM.D5045.XX

THREE POINT FLEXURE FIXTURE (CS)

  ASTM.D5045.20

COMPRESSION ANTI-BUCKLING FIXTURE

ASTM.D3846.10

SHORT BEAM FLEXURE FIXTURE FOR PULTRUDED REINFORCED PLASTIC

ASTM.D4475.10

FLEXURE FIXTURE FOR FIBER REINFORCED PULTRUDED PLASTIC

  ASTM.D4476.10

PARALLEL PLATE TEST FIXTURE FOR PLASTIC FILM

ASTM.D3354.10

SPECIMEN CLAMPING PLATE SET (0” - 1/4”)

ASTM.D3916.10

(0” - 1/4”)

ASTM.D3916.11

(1/2” TO 3/4”)

ASTM.D3916.12

(7/8” TO 1”)

60" ADJUSTABLE FLATWISE FOUR POINT FLEXURE FIXTURE (CS)

ASTM.D6109.14

12" SPAN, FOUR POINT FLEXURE FIXTURE FOR SPECIMENS UP TO 2" WIDE (SS)

ASTM.D6272.10