Home Page Test Fixtures Adapters Plating Test Fixtures Grips and Accessories Employment Opportunities Contact Us

Material Testing Technology

Material Testing Technology

Email: sales@mttusa.net

Terms and Conditions

Request Quote

© 2016- Material Testing Technology

 USED TESTING EQUIPMENT

From time to time MTT may take a used machine in on trade, or offer to sell a testing machine for our customers.  The items shown here are a partial listing on test machines available for sale.

U156/ TMI- Specimen Cutting Press

Platen, Base, Main Shafts and Gear, Surface ground providing the most exact parallel surfaces.

Depth penetration stop, and tension adjusting nut for safety.

Capacity: 1.5 ton on dies for approx. 100lbs applied load on leaver arm.

Base surface 8"X7" Platen 7"x4" providing equal pressure distribution.

Light under platen 3" under dies 1".

Made in the U.S.A. 

U164/ JDC Paper and Foil Specimen Cutter

7.5M Wide -10” Long

Dual-blade cutting action gives you clean, accurate cuts for paper, paperboard, plastic, film, rubber, textiles, nonwovens, metal foils and other sheet materials. The JDC is recognized worldwide as the industry standard for materials testing sample preparation. The JDC has become the accepted standard for most corporations worldwide for preparing samples of paper, paperboard, metal foils, nonwovens, films, tissue and a variety of other materials. Lightweight and portable, the JDC can also be anchored via the cast iron base for added stability and operator safety. Shields are provided to ensure safety as well.The JDC cuts test strips to an exact width and parallel throughout their entire length. The positive cutting action of the dual blades and precision ground base shear cut both sides of the sample at once assuring you of a clean, accurate cut every time. The cutting blades are made of a special tool steel which is stress-relieved by cycling between cold and hot temperatures to prevent the blades from warping.

U168/ Used TO Charpy Impactor

Charpy impact testing has been used for many years to test the impact toughness of various metals. The advent of modern composites brought about materials with properties that depend on their orientation.

The Charpy impact test method works by placing a notched specimen (with the notch facing away from the point of contact) into a large machine with a pendulum of a known weight. The pendulum is raised to a known height and allowed to fall. As the pendulum swings, it impacts and breaks the specimen, rising to a measured height.

The specimen that fits into the Charpy impact tester is rectangular with a notch cut in one side. The notch allows for predetermined crack initiation location. Many composite Charpy impact tests are performed without the notch cut into the specimen. In these cases it should be noted in the experimental procedure if the notch is not present.

U180/ Used Curtis Wedge Grips

Used 5,000 lbs capacity Curtis Pneumatic Grip set.

Includes flat grip faces

Grip width: 3”

Grip depth:1.5”

Grip height:3.5”

Adapter Threads: 1/2”-13 2B

Specimen Width: 1”

Specimen Thickness: 1/64” to 3/8”

*********SOLD AS IS, WHERE IS, WITHOUT A WARRANTY**************

Shipping is not included in the sale price

U300/ JDC Paper and Foil Specimen Cutter

25M (1”) Wide -10” Long

Dual-blade cutting action gives you clean, accurate cuts for paper, paperboard, plastic, film, rubber, textiles, nonwovens, metal foils and other sheet materials. The JDC is recognized worldwide as the industry standard for materials testing sample preparation. The JDC has become the accepted standard for most corporations worldwide for preparing samples of paper, paperboard, metal foils, nonwovens, films, tissue and a variety of other materials. Lightweight and portable, the JDC can also be anchored via the cast iron base for added stability and operator safety. Shields are provided to ensure safety as well.The JDC cuts test strips to an exact width and parallel throughout their entire length. The positive cutting action of the dual blades and precision ground base shear cut both sides of the sample at once assuring you of a clean, accurate cut every time. The cutting blades are made of a special tool steel which is stress-relieved by cycling between cold and hot temperatures to prevent the blades from warping.