Home Page Test Fixtures Adapters Plating Test Fixtures Grips and Accessories Employment Opportunities Contact Us

Material Testing Technology

Material Testing Technology

Email: sales@mttusa.net

Terms and Conditions

Request Quote

© 2016- Material Testing Technology

MODEL NO. SACM.00888.30

COMPOSITE - SHEAR


D2344.10.pdf

SHORT BEAM SHEAR AND THREE POINT FLEXURE FIXTURE (ADJUSTABLE SUPPORTS)


Specimen:

Width

Any width up to 1.5”


Thickness

Any thickness up to 2.0”


Length

Any length up to 6” span




Fixture:

Support Spans

Any span from 0.125” to 6.0”


Loading Radii

1/8”R (loading nose)  1/16”R (supports)


Construction

Stainless steel


Temperature

-240 to 600°F (-152 to 318°C)


Mounting

12mm Male Clevis (Type O) Top

1/2” -20 Threaded Coupling Bottom


Capacity

2,000 lbs (8.8kN)


Weight

15 lbs


Dimensions

Assembled - 2.3” x 7” x 11.3”


Standard

Manufactured in accordance with SACMA 888

Quote: Model No. SACM.00888.30


Short Beam Interlaminar Shear fixture with three point loading head. Specimen supports are free-moving slides.  Three point loading head is supplied with a fixed 0.250" (6mm) diameter loading nose.  Loading head is guided by a grooved shaft and double linear bearings.  Fixture is constructed from stainless steel in accordance with SACMA 888


Support Base - Constructed from stainless steel. 7" long by 1.5" wide with a T-slot running the length of the base.  The upper and lower surfaces are ground flat and parallel.  The support block separation measured along a center finding scale located on the the front surface of the support base.  Includes 1/2” -20 threaded coupling for mounting purposes.


Specimen Supports - Constructed from stainless steel.  1.5" wide by 1.5" tall with alignment rails which fit in the T-slotted support base.  The supports are supplied with 0.1250" (3mm) diameter support.  The center position of the support diameter is indicated by a scribe line which runs down the side of the support to the center finding scale.  The supports are free to slide anywhere along the support base and may be reversed for short and long spans.  Includes 12mm (Type O) male clevis adapter.


Accessories:

ACC.00888.1001 - Extra Loading Nose - 5mm R

ACC.00888.1002 - Extra Set of (2) Supports - 2mm R

ACC.00888.1003 - Extra Loading Nose - 3mm R

ACC.00888.1004 - Extra Set of (2) Supports - 3mm R

ACC.00888.1005 - Fixed Span 4 Point Loading Nose - Please specify diameter

ACC.00888.1006 - Set of Extra Loading Nose and (2) Supports

ACC.00888.1007 - Extra Set of (2) Supports with Alignment Clips (Specify size)


Upper and lower fixture attachment is supplied with 1/2” -20 female coupling (Common adapter sizes include:)

Model No. M01S21 - 1/2” Male Clevis (Type B) to 1/2” -20 Threaded Stud

Model No. M02S21 - 5/8” Male Clevis (Type C) to 1/2” -20 Threaded Stud

Model No. M03S21 - 1.25” Male Clevis (Type D) to 1/2” -20 Threaded Stud

Model No. M12S21 - 12mm Male Clevis (Type O) to 1/2” -20 Threaded Stud

Model No. S36S21 - 1” -14 to 1/2” -20 Threaded Step Stud

Model No. LN21 - 1/2” -20 Threaded Locking Nut with Knurled OD

Spare Parts:


SPA.00888.1001- Replacement Bearings

SPA.00888.1002- Replacement Shaft