Home Page Test Fixtures Adapters Plating Test Fixtures Grips and Accessories Employment Opportunities Contact Us

Material Testing Technology

Material Testing Technology

Email: sales@mttusa.net

Terms and Conditions

Request Quote

© 2016- Material Testing Technology

JUMP TO:

D1000

D2000

D3000

D4000

D5000

D6000

D7000


Photo

Coming Soon

ASTM.G0039.10

TWO POINT STRESS CORROSION FIXTURE (SS)


                   

         Product Literature  

 

Photo

Coming Soon

ASTM.G0039.18

STRESSING JIG FOR TWO POINT LOAD SPECIMENS FROM 1" - 6" LONG WITH 1" WIDTH (AL)


                

          Product Literature         


ASTM.G0065.10

DRY SAND/RUBBER WHEEL ABRASION TEST FIXTURE


                                                          

          Product Literature              Video                      Drawing


ASTM G STANDARD

ASTM.B0406.10

THREE POINT TRANSVERSE RUPTURE STRENGTH FIXTURE (SS)


                                                                        

         Product Literature                                               Drawing  

            

ASTM.B0557.20

SHOULDER-END (BUTTON HEAD) SPECIMEN HOLDER GRIPS WITH STANDARD 0.505" DIAMETER SPECIMEN INSERTS


                                                                        

         Product Literature                                               Drawing  

   

ASTM.B0565.10

DOUBLE SHEAR STRENGTH TEST FIXTURE FOR ALUMINUM, WIRE AND ROD


                                                                        

         Product Literature                                               Drawing

          

ASTM.B0571.10

90° CONSTANT ANGLE PEEL FIXTURE WITH 2" x 9" TEST PANELS


                                                                        

         Product Literature                                               Drawing     


ASTM.B0636.10

MTT GEARLESS SPIRAL CONTRACTOMETER


                                                                       

         Product Literature                                              Drawing   

  

ASTM.B0769.10

DOUBLE-SHEAR TEST FIXTURE WITH ALUMINUM ALLOYS WITH .25", .375", .5" DIAMETER INSERTS


                                                                        

          Product Literature                                              Drawing        

  

ASTM.B0831.10

DOUBLE CLEVIS PIN TYPE GRIPS FOR SHEAR TESTING


                                                                        

          Product Literature                                              Drawing         

  

ASTM.B0905.10

LOW FORCE VARIABLE ANGLE PEEL FIXTURE


                                                          

         Product Literature              Video                      Drawing         


ASTM B STANDARD

ASTM.F0394.10

CERAMIC BIAXIAL FLEXURE STRENGTH FIXTURE (SS)


                                                                       

           Product Literature                                            Drawing         


ASTM.F0521.10

FLATWISE TENSION FIXTURE (SS) WITH 5 SETS OF 2” SQUARE (AL) BONDING BLOCKS  -  UNIVERSAL JOINT TYPE


                                                                       

         Product Literature                                              Drawing         


ASTM.F0521.11

2 INCH SQUARE FLATWISE TENSION FIXTURE WITH 5 SETS OF BONDING BLOCKS


                                                                                      

                                                                                      Drawing         

 

ASTM.F0521.12

THREE-PLY SHEAR TEST FIXTURE FOR TRANSPARENT LAMINATIONS


                                                                       

         Product Literature                                              Drawing         


ASTM.F0521.13

FIVE-PLY SHEAR TEST FIXTURE FOR TRANSPARENT LAMINATIONS


                                                                       

         Product Literature                                              Drawing         

 

ASTM.F0606.10

FASTENER TENSILE GRIPS FOR BOLTS UP TO 0.5" DIAMETER (30 KIP)


                                                                       

         Product Literature                                                   


ASTM.F0606.20

FASTENER TENSILE GRIPS FOR BOLTS FROM 0.375" TO  1" DIAMETER (120 KIP)


                                                                       

         Product Literature                                                   


ASTM.F0606.30

FASTENER TENSILE GRIPS FOR BOLTS FROM 0.75" TO 1.5" DIAMETER (190 KIP)


                                                                       

         Product Literature                                                    


ASTM.F0606.40

FASTENER TENSILE GRIPS FOR BOLTS FROM 1" TO 1.5" DIAMETER (300 KIP)


                                                                       

         Product Literature                                                   


ASTM.F1044.20

GRIPPING DEVICE FOR SHEAR TESTING WITH 1/2”-20 STUD ADAPTERS FOR ALIGNED INTERFACE SPECIMENS


                                                                       

         Product Literature                                              Drawing         


ASTM.F1147.10

DOUBLE YOKE AND DOWEL PIN GRIPPING DEVICE WITH FIVE SETS OF 1.13” ROUND BONDING BLOCKS


                                                                       

         Product Literature                                              Drawing         


ASTM.F1306.10

SLOW RATE PENETRATION RESISTANCE OF FILMS AND LAMINATES


                                                                       

         Product Literature                                              Drawing         


ASTM.F1342.10

PROTECTIVE CLOTHING MATERIAL TURRET TYPE PUNCTURE FIXTURE (4 POSITION)


                                                                       

         Product Literature                                              Drawing         


ASTM F STANDARD

ASTM.E0008.10

20 KIP WEDGE ACTION GRIPS FOR 2" WIDE GRIP FACES (PLATE OR SHEET)


                                                           

         Product Literature               Video                      Drawing         


ASTM.E0008.20

THREADED-END SPECIMEN GRIP (THREADS UP TO 0.5" DIAMETER)


                                                                         

         Product Literature                                                Drawing         


ASTM.E0008.21

THREADED-END SPECIMEN GRIP (THREADS FROM 0.5" TO 1" DIAMETER)


                                                                         

         Product Literature                                                Drawing         


ASTM.E0008.22

THREADED-END SPECIMEN GRIP (THREADS FROM 1.125" TO 1.5" DIAMETER)


                                                                         

         Product Literature                                                Drawing         


ASTM.E0008.30

SHOULDER-END (BUTTON HEAD) SPECIMEN HOLDER COLLETS


                                                                         

         Product Literature                                                Drawing         


ASTM.E0008.40

ADJUSTABLE GUIDED BEND TEST FIXTURE FOR WELDED STEEL PRODUCTS


                                                                         

         Product Literature                                                Drawing         


ASTM.E0008.60

5 KIP WEDGE ACTION GRIPS WITH SERRATED FACES


                                                                         

         Product Literature                                                Drawing         


ASTM.E0008.61

SNUBBING TYPE WIRE TENSION GRIPS, UP TO 0.25" WIRE


                                                                         

         Product Literature                                                Drawing         


ASTM.E0009.10

COMPRESSION STRENGTH SPHERICAL SEATED SUB-PRESS WITH 5 CENTERING WASHERS


                                                                         

         Product Literature                                                Drawing         


ASTM.E0190.10

ADJUSTABLE GUIDED-BEND TEST FIXTURE FOR WELDED STEEL PRODUCTS


                                                                         

         Product Literature                                                Drawing         


ASTM.E0238.10

TENSILE LOADING CLEVIS SET WITH LOADING (5) PINS


                                                                         

         Product Literature                                                Drawing         


ASTM.E0399.0X

COMPACT TENSION LOADING CLEVIS SET - 17-4 PH STAINLESS STEEL


                                                                         

         Product Literature                                                Drawing         


ASTM.E0399.2X

COMPACT TENSION LOADING CLEVIS SET - MARAGING 300 STEEL


                                                                         

         Product Literature                                                Drawing         


ASTM.E0399.4X

COMPACT TENSION LOADING CLEVIS SET - INCONEL 718 STEEL


                                                                         

         Product Literature                                                Drawing         


E399.52.jpg

ASTM.E0399.52

THREE POINT BEND PLANE STRAIN FRACTURE TOUGHNESS FIXTURE


                                                          

         Product Literature                              


ASTM.E0647.0X

COMPACT TENSION CLEVIS GRIP SETS - 17-4 PH STAINLESS STEEL


                                                                         

         Product Literature                                                Drawing         


ASTM.E0647.2X

COMPACT TENSION CLEVIS GRIP SETS - MARAGING 300 STEEL


                                                                         

         Product Literature                                                Drawing         


ASTM.E0647.4X

COMPACT TENSION CLEVIS GRIP SETS - INCONEL 718 STEEL


                                                                         

         Product Literature                                                Drawing         


ASTM.E1304.10

PLANE-STRAIN FRACTURE TOUGHNESS TEST FIXTURE


                                                                         

         Product Literature                                                Drawing         


ASTM.E1820.0X

COMPACT TENSION CLEVIS GRIP SETS - 17-4 PH STAINLESS STEEL


                                                                         

         Product Literature                                                Drawing         


ASTM.E1820.2X

COMPACT TENSION CLEVIS GRIP SETS - MARAGING 300 STEEL


                                                                         

         Product Literature                                                Drawing         


ASTM.E1820.4X

COMPACT TENSION CLEVIS GRIP SETS - INCONEL 718 STEEL


                                                                         

         Product Literature                                                Drawing         


ASTM.E1820.52

THREE POINT BEND PLANE STRAIN FRACTURE TOUGHNESS FIXTURE


                                                         

       Product Literature                         


ASTM.E1922.0X

COMPACT TENSION CLEVIS GRIP SETS - 17-4 PH STAINLESS STEEL


                                                                         

        Product Literature                                                 Drawing     

    

ASTM.E1922.2X

COMPACT TENSION CLEVIS GRIP SETS - MARAGING 300 STEEL

 

                                                                         

       Product Literature                                                  Drawing         



ASTM.E1922.4X

COMPACT TENSION CLEVIS GRIP SETS - INCONEL 718 STEEL

                                                          

                                                                         

       Product Literature                                                  Drawing         


ASTM E STANDARD

ASTM.A0185.10

WELDED WIRE FABRIC SHEAR FIXTURE WITH 90° LOADING PLATE (OPTIONAL LOADING PLATE (CS)


                                                                        

         Product Literature                                               Drawing         


ASTM.A0194.10

PROOF LOAD TEST FIXTURE (SS)


Check out:

ASTM.F0606.10

ASTM.F0606.20

ASTM.F0606.30

ASTM.F0606.40


ASTM.A0370.10

TITAN SERIES 20 KIP WEDGE ACTION GRIP, 2" WIDE GRIP FACES (PLATE OR SHEET)


                                                          

         Product Literature              Video                      Drawing         


ASTM.A0370.20

SHOULDER-END (BUTTON HEAD) SPECIMEN HOLDER COLLETS


                                                                        

         Product Literature                                               Drawing         


ASTM.A0370.21

THREADED-END SPECIMEN GRIP (THREADS UP TO 0.5" DIAMETER)


                                                                       

         Product Literature                                              Drawing         


ASTM.A0370.22

THREADED-END SPECIMEN GRIP (THREADS FROM 0.625" TO 1" DIAMETER)


                                                                        

         Product Literature                                              Drawing         


ASTM.A0370.23

THREADED-END SPECIMEN GRIP (THREADS FROM 1.125" TO 1.5" DIAMETER)


                                                                        

         Product Literature                                               Drawing         


ASTM.A0370.31

HYDRAULIC PRESSURIZED RING EXPANSION FIXTURE WITH POWER PACK


                                                                        

         Product Literature                                               Drawing         


ASTM.A0370.37

COLLET TYPE TENSILE GRIPS FOR TUBULAR SPECIMENS WITH METAL PLUG


                                                                        

         Product Literature                                               Drawing         


ASTM.A0370.40

ADJUSTABLE GUIDED-BEND TEST FIXTURE FOR WELDED STEEL PRODUCTS


                                                                        

         Product Literature                                               Drawing         


ASTM.A0370.50

FASTENER TENSILE GRIPS FOR BOLTS SIZE UP TO 0.5" DIAMETER (30 KIP) FLAT AND WEDGE WASHER


Check out:

ASTM.F0606.10

ASTM.A0370.52

FASTENER TENSILE GRIPS FOR BOLTS SIZE UP TO 0.375" TO 1" DIAMETER (120 KIP) FLAT AND WEDGE WASHERS


Check out:

ASTM.F0606.20


ASTM.A0370.53

FASTENER TENSILE GRIPS FOR BOLTS SIZE UP TO 1" TO 1.5" DIAMETER (190 KIP)

                              

Check out:

ASTM.F0606.30


ASTM.A0370.54

FASTENER TENSILE GRIPS FOR BOLTS SIZE UP TO 1" TO 1.5" DIAMETER (300 KIP)


Check out:

ASTM.F0606.40


ASTM.A0370.60

5 KIP WEDGE ACTION GRIPS WITH SERRATED FACES


                                                                        

         Product Literature                                               Drawing         


ASTM.A0370.61

5,000 LBS CAPACITY SNUBBING TYPE WIRE TENSION GRIPS FOR UP TO 0.25" WIRE


                                                                        

         Product Literature                                               Drawing         


ASTM.A0370.62

20,000 LBS CAPACITY SNUBBING TYPE WIRE TENSION GRIPS FOR UP TO 0.75" WIRE


                                                                        

         Product Literature                                               Drawing         


ASTM.A0370.64

20,000 LBS CAPACITY SNUBBING TYPE WIRE TENSION GRIPS FOR UP TO 0.375" WIRE


                                                                        

         Product Literature                                               Drawing         


ASTM.A0370.65

20,000 LBS CAPACITY SNUBBING TYPE WIRE TENSION GRIPS FOR UP TO 0.75" WIRE


                                                                        

         Product Literature                                               Drawing         


ASTM.A0370.67

1,000 LBS CAPACITY SNUBBING TYPE WIRE TENSION GRIPS FOR UP TO .02” WIRE


                                                                        

         Product Literature                                               Drawing         


ASTM.A0370.70

TENSILE TESTING OF THIN WALL TUBING FOR SPECIMEN DIAMETERS OF 0 - 1"


                                                                        

         Product Literature                                               Drawing         


ASTM.A0370.71

TENSILE TESTING OF THIN WALL TUBING FOR SPECIMEN DIAMETERS OF 1" -  2.25"


                                                                        

         Product Literature                                               Drawing         


ASTM.A0370.72

TENSILE TESTING OF THIN WALL TUBING FOR SPECIMEN DIAMETERS OF 2" -  6"


                                                                        

         Product Literature                                               Drawing         


ASTM.A0497.10

WELDED WIRE FABRIC SHEAR FIXTURE WITH 90° LOADING PLATE


                                                                        

         Product Literature                                               Drawing         


ASTM.A0666.10

CONTROLLED BEND (V-BLOCK) TEST FIXTURE (SS)


                                                                        

         Product Literature                                               Drawing         


ASTM.A0962.10

FASTENER TENSILE GRIPS FOR BOLTS UP TO 0.5" DIAMETER (30 KIP)


Check out:

ASTM.F0606.10

                 


ASTM.A0962.20

FASTENER TENSILE GRIPS FOR BOLTS FROM 0.375" TO  1" DIAMETER (120 KIP)

                                                          

Check out:

ASTM.F0606.20


ASTM.A0962.30

FASTENER TENSILE GRIPS FOR BOLTS FROM 0.75" TO 1.5" DIAMETER (190 KIP)


Check out:

ASTM.F0606.30


ASTM.A0962.40

FASTENER TENSILE GRIPS FOR BOLTS FROM 1" TO 1.5" DIAMETER (300 KIP)


 Check out:

ASTM.F0606.40

ASTM.A1064.10

WELDED WIRE FABRIC SHEAR FIXTURE WITH 90° LOADING PLATE (OPTIONAL LOADING PLATE (CS)


                                                                        

         Product Literature                                               Drawing         


ASTM A STANDARD

ASTM.C0067.11

FULLY ARTICULATING THREE AND FOUR POINT FLEXURE FIXTURE


                                                                        

         Product Literature                                               Drawing      


ASTM.C0067.30

MEASUREMENT OF WARPAGE


                                                                        

         Product Literature                                               Drawing      


ASTM.C0134.10

WARPAGE MEASURING WEDGE


                                                                        

         Product Literature                                               Drawing    


ASTM.C0158.10

3 AND 4 POINT FLEXURE FIXTURE FOR FLAT GLASS OR ROD SPECIMENS (STAINLESS STEEL)


                                                                        

         Product Literature                                               Drawing    


ASTM.C0158.11

3 AND 4 POINT FLEXURE FIXTURE FOR FLAT GLASS OR ROD SPECIMENS (STEEL)


                                                                        

         Product Literature                                               Drawing    


ASTM.C0158.20

3 AND 4 POINT 30” SPAN GLASS PLATE FLEXURE FIXTURE FOR SPECIMENS UP TO 16” WIDE


                                                                        

         Product Literature                                               Drawing    


ASTM.C0158.21

3 AND 4 POINT 6” SPAN GLASS PLATE FLEXURE FIXTURE FOR SPECIMENS UP TO 6” WIDE


                                                                        

         Product Literature                                               Drawing    


ASTM.C0158.25

3 AND 4 POINT 12” SPAN GLASS PLATE FLEXURE FIXTURE FOR SPECIMENS UP TO 12” WIDE


                                                                        

         Product Literature                                               Drawing    


ASTM.C0203.21

THREE POINT FLEX FIXTURE FOR BLOCK-TYPE THERMAL INSULATION (CS)


                                                                        

         Product Literature                                               Drawing    


ASTM.C0273.10

FLATWISE PLANE SHEAR FIXTURE (SS) WITH THREE SETS OF BONDING PLATES (AL) (TENSILE MODE)


                                                                        

         Product Literature                                               Drawing    


ASTM.C0273.11

FLATWISE PLANE SHEAR FIXTURE (SS) WITH THREE SETS OF BONDING PLATES (AL) (COMPRESSION MODE)


                                                                        

         Product Literature                                               Drawing    


ASTM.C0273.12

FLATWISE PLANE SHEAR FIXTURE (CS) WITH THREE SETS OF BONDING PLATES (AL) (TENSILE MODE)


                                                                        

         Product Literature                                               Drawing    


ASTM.C0273.13

FLATWISE PLANE SHEAR FIXTURE (CS) WITH THREE SETS OF BONDING PLATES (AL) (COMPRESSION MODE)


                                                                        

         Product Literature                                              Drawing    


C0297.10RS-edited.jpg

ASTM.C0297.10

FLATWISE TENSION FIXTURE (SS) WITH 5 SETS OF 1” SQUARE (AL) BONDING BLOCKS - UNIVERSAL JOINT TYPE


                                                                        

         Product Literature                                               Drawing    


ASTM.C0297.11

FLATWISE TENSION FIXTURE (SS) WITH 5 SETS OF 2” SQUARE (AL) BONDING BLOCKS -  UNIVERSAL JOINT TYPE


                                                                        

         Product Literature                                               Drawing  


ASTM.C0297.12

FLATWISE TENSION FIXTURE (SS) WITH 5 SETS OF 2” DIAMETER (AL) BONDING BLOCKS- SPHERICAL SEAT TYPE


                                                                        

         Product Literature                                               Drawing  


ASTM.C0307.10

BRIQUET SPECIMEN TENSILE GRIPS FOR MORTAR, GROUTS AND MONOLITHIC MATERIALS (SS)


                                                                        

         Product Literature                                               Drawing  


ASTM.C0363.10

6" WIDE MULTIPLE-PIN TYPE GRIPS (SS)


                                                                        

         Product Literature                                               Drawing  


ASTM.C0363.11

6" WIDE MULTIPLE-PIN TYPE GRIPS  (CS)


                                                                        

         Product Literature                                               Drawing  


ASTM.C0364.10

ADJUSTABLE EDGEWISE COMPRESSION FIXTURE WITH 4” SELF-ALIGNING AND A NOTCHED SPHERICAL SEAT (CS)


                                                                        

         Product Literature                                               Drawing  

  

ASTM.C0365.10

6" DIAMETER PLATEN SET WITH A SELF-ALIGNING SPHERICAL SEAT AND A FIXED COMPRESSION PLATEN


                                                                        

         Product Literature                                               Drawing  


ASTM.C0365.11

6" DIAMETER COMPRESSION PLATEN WITH 12" LONG SUPPORT CYLINDER FOR LVDT TESTING (LVDT NOT INCLUDED)


                                                                        

         Product Literature                                               Drawing  


ASTM.C0393.14

24" SPAN SANDWICH BEAM FLEXURE / SHEAR FIXTURE (CS) -  4" WIDE


                                                                        

         Product Literature                                               Drawing  


ASTM.C0393.17

30" SPAN SANDWICH BEAM FLEXURE / SHEAR FIXTURE (CS) -  5" WIDE


                                                                        

         Product Literature                                               Drawing  


ASTM.C0394.10

FLATWISE PLANE SHEAR FATIGUE FIXTURE (SS) WITH THREE SETS OF BONDING PLATES (AL) (TENSILE MODE)


                                                                        

         Product Literature                                               Drawing  


ASTM.C0394.11

FLATWISE PLANE SHEAR FATIGUE FIXTURE (SS) WITH THREE SETS OF BONDING PLATES (AL) (COMPRESSION MODE)


                                                                        

         Product Literature                                               Drawing  


ASTM.C0394.12

FLATWISE PLANE SHEAR FATIGUE FIXTURE (CS) WITH THREE SETS OF BONDING PLATES (AL) (TENSILE MODE)


                                                                        

         Product Literature                                               Drawing  


ASTM.C0394.13

FLATWISE PLANE SHEAR FATIGUE FIXTURE (CS) WITH THREE SETS OF BONDING PLATES (AL) (COMPRESSION MODE)


                                                                        

         Product Literature                                               Drawing   


ASTM.C0496.20

CYLINDRICAL CONCRETE SPECIMEN ALIGNING JIG


                                                                        

         Product Literature                                               Drawing   


ASTM.C0512.12

60,000 POUND CAPACITY - SPRING LOADED  CREEP STAND WITH HYDRAULIC LOADING SYSTEM


                                                                        

         Product Literature                                               Drawing   


ASTM.C0512.13

100,000 POUND CAPACITY - SPRING LOADED  CREEP STAND WITH HYDRAULIC LOADING SYSTEM


                                                                        

         Product Literature                                               Drawing   


ASTM.C0512.14

 150,000 POUND CAPACITY - SPRING LOADED  CREEP STAND WITH HYDRAULIC LOADING SYSTEM


                                                                        

         Product Literature                                               Drawing   


ASTM.C0512.15

 200,000 POUND CAPACITY - SPRING LOADED  CREEP STAND WITH HYDRAULIC LOADING SYSTEM


                                                                        

         Product Literature                                               Drawing   


ASTM.C0512.16

250,000 POUNDS CAPACITY - SPRING LOADED  CREEP STAND WITH HYDRAULIC LOADING SYSTEM


                                                                        

         Product Literature                                               Drawing  


ASTM.C0512.17

 300,000 POUND CAPACITY - SPRING LOADED  CREEP STAND WITH HYDRAULIC LOADING SYSTEM


                                                                        

         Product Literature                                               Drawing  


ASTM.C0557.10

SHEAR STRENGTH IN-PLANE LOADING FIXTURE FOR 4" x 4" SPECIMENS (CS)


                                                                        

         Product Literature                                               Drawing  


ASTM.C0557.20

FLATWISE TENSION FIXTURE WITH LOADING YOKE AND FLATWISE TENSILE GRIP


                                                                        

         Product Literature                                               Drawing  


ASTM.C0633.10

FLATWISE TENSION FIXTURE (CS) WITH 5 SETS OF 1” ROUND BONDING BLOCKS (CS) - UNIVERSAL JOINT TYPE


                                                                        

         Product Literature                                               Drawing  


ASTM.C0633.11

FLATWISE TENSION FIXTURE (SS) WITH 5 SETS OF 1” ROUND BONDING BLOCKS (CS) - UNIVERSAL JOINT TYPE


                                                                        

         Product Literature                                               Drawing  


ASTM.C0749.10

SPLIT COLLET LOADING GRIP ASSEMBLY WITH LOADING YOKES


                                                                        

         Product Literature                                               Drawing  


ASTM.C0749.20

CARBON AND GRAPHITE SHOULDER LOADING TENSILE GRIP SET


                                                                        

         Product Literature                                               Drawing  


ASTM.C0880.10

FOUR POINT FLEXURE FIXTURE FOR STONE SPECIMEN


                                                                        

         Product Literature                                               Drawing     


ASTM.C0932.10

BRIQUET SPECIMEN TENSILE GRIPS FOR MORTAR, GROUTS MONOLITHIC MATERIALS (SS)


                                                                        

         Product Literature                                               Drawing     


ASTM.C0947.11

4" WIDE FULLY ARTICULATING - FOUR POINT FLEXURE FIXTURE (CS) - UP TO 24" SPANS


                                                                        

         Product Literature                                               Drawing     


ASTM.C1135.10

FLATWISE TENSION ADHESION FIXTURE WITH FIVE SETS OF FLOAT GLASS BONDING PLATES


                                                         

         Product Literature             Video                          


ASTM.C1161.10

1" WIDE, 6" SPAN,  FULLY ARTICULATING THREE & FOUR POINT FLEXURE FIXTURE WITH 4.5mm DIAMETER LOADING PINS (SS)


                                                         

         Product Literature             Video                      Drawing     


ASTM.C1161.11

1" WIDE, 6" SPAN,  FULLY ARTICULATING THREE & FOUR POINT FLEXURE FIXTURE WITH 4.5mm DIAMETER LOADING PINS (AL)


                                                         

         Product Literature             Video                      Drawing     


ASTM.C1161.12

1" WIDE, 6" SPAN,  FULLY ARTICULATING THREE & FOUR POINT FLEXURE FIXTURE WITH 4.5mm DIAMETER LOADING PINS (CS)


                                                         

         Product Literature             Video                      Drawing  


ASTM.C1211.10

1" WIDE, 6" SPAN,  FULLY ARTICULATING THREE & FOUR POINT FLEXURE FIXTURE WITH 4.5mm DIAMETER LOADING PINS (SS)


                                                                       

         Product Literature                                              Drawing  



ASTM.C1292.10

V-NOTCHED BEAM (IOSIPESCU SHEAR) FIXTURE - ADJUSTABLE WEDGES STYLE (SS)


                                                                      

         Product Literature                                              Drawing  


ASTM.C1499.10

MONOTONIC EQUIBIAXIAL FLEXURAL STRENGTH (RING-ON-RING) TEST FIXTURE (CS)



                                                                      

         Product Literature                                              Drawing  


ASTM.C1499.11

MONOTONIC EQUIBIAXIAL FLEXURAL STRENGTH (RING-ON-RING) AND BIAXIAL FLEXURE TEST FIXTURE (CS)


                                                                      

         Product Literature                                              Drawing  


ASTM.C1499.13

MONOTONIC EQUIBIAXIAL FLEXURAL STRENGTH (RING-ON-RING) TEST FIXTURE (CS)


                                                                      

         Product Literature                                             Drawing  


ASTM.C1499.18

MONOTONIC EQUIBIAXIAL FLEXURAL STRENGTH (RING-ON-RING) TEST FIXTURE (CS)  


                                                                      

         Product Literature                                             Drawing  


ASTM.C1674.11

1" WIDE, 6" SPAN,  FULLY ARTICULATING THREE & FOUR POINT FLEXURE FIXTURE WITH 4.5mm DIAMETER LOADING PINS (AL)



                                                                      

         Product Literature                                             Drawing  


ASTM C STANDARD

ASTM.D0143.10

COMPRESSION PARALLEL TO GRAIN


                                                                       

         Product Literature                                              Drawing         


ASTM.D0143.20

WOOD CLEAVAGE TEST FIXTURE


                                                                       

         Product Literature                                              Drawing         


ASTM.D0143.30

WOOD PARALLEL TO THE GRAIN TENSILE GRIP


                                                                       

         Product Literature                                              Drawing         


ASTM.D0143.40

WOOD PERPENDICULAR TO THE GRAIN TENSILE GRIPS


                                                                       

         Product Literature                                              Drawing         


ASTM.D0143.45

PERPENDICULAR TO THE GRAIN COMPRESSION


                                                                       

         Product Literature                                              Drawing         


ASTM.D0143.50

NAIL WITHDRAWAL TEST FIXTURE


                                                                       

         Product Literature                                                       


ASTM.D0143.51

STAND ALONE NAIL WITHDRAWAL LOADING FRAME (AL)


                                                                       

         Product Literature                                                       


ASTM.D0143.60

STATIC BENDING FLEXURE FIXTURE


                                                                       

         Product Literature                                              Drawing         


ASTM.D0143.62

120” STATIC BEND FIXTURE FOR WOOD SUBSTRATES


                                                         

         Product Literature                   


ASTM.D0143.70

SHEAR PARALLEL TO GRAIN


                                                                       

         Product Literature                                              Drawing         


ASTM.D0143.80

MODIFIED JANKA BALL HARDNESS TEST FIXTURE WITH DIAL GAGE ATTACHMENT (11.3MM DIA. NOSE)


                                                         

         Product Literature              Video                      Drawing         


ASTM.D0143.81

MODIFIED JANKA BALL HARDNESS TEST FIXTURE WITH DIAL GAGE ATTACHMENT (10MM DIA. NOSE)


                                                         

         Product Literature              Video                      Drawing         


ASTM.D0198.10

FOUR POINT FLEXURE FOR WOODEN BEAMS


                                  

         Product Literature                      


ASTM.D0198.12

FOUR POINT FLEXURE FOR WOODEN BEAMS


                                  

         Product Literature                     


ASTM.D0395.10

COMPRESSION SET FIXTURE UNDER CONSTANT DEFLECTION


                                                                       

         Product Literature                                              Drawing    


ASTM.D0395.20

COMPRESSION SET FIXTURE USING CALIBRATED SPRING


                                                                       

         Product Literature                                              Drawing    


ASTM.D0395.21

COMPRESSION SET FIXTURE USING EXTERNAL LOADING


                                                                       

         Product Literature                                              Drawing    


ASTM.D0412.00A

DUMBBELL SPECIMEN DIE FOR RUBBER SPECIMENS TYPE

A - B - C - D - E - F


                                   

         Product Literature              


ASTM.D0412.10

SIX POSITION TENSILE TEST FIXTURE


                                                                       

         Product Literature                                              Drawing


ASTM.D0412.20

150 LBS ECCENTRIC RUBBER GRIPS

(SELF-ROTATING SHAFTS)


                                                                       

         Product Literature                                              Drawing


ASTM.D0412.21

150 POUND ECCENTRIC RUBBER GRIPS

(MOTORIZED ROTATING SHAFTS)


                                                                       

         Product Literature                                              Drawing


SFF.D0412.2254

VACUUM PLATE AND RING CUTTERS FOR SPECIMEN PREPARATION


                                                                       

         Product Literature                                              Drawing


ASTM.D0412.30

SELF-CLOSING AND SELF-LOCKING KNURLED ECCENTRIC ROLLER TYPE TENSILE GRIP


                                                                       

         Product Literature                                              Drawing


ASTM.D0543.10

CONSTANT STAIN LOADING FIXTURE WITH RADIUS CLAMPING SURFACE


                                                                       

         Product Literature                                              Drawing


ASTM.D0624.10

200 LBS TENSILE GRIPS FOR RUBBER TENSILE TESTING


                                                                       

         Product Literature                                               


ACC.D0624.10A

RUBBER TEAR SPECIMEN DIE (A) (B) (C)


                                    

         Product Literature              


ASTM.D0638.10

20,000 LBS WEDGE ACTION GRIPS FOR SPECIMENS UP TO 2" WIDE OR 3/4" ROUND (GRIP FACES  SOLD SEPARATELY)


                                                         

         Product Literature              Video                      Drawing


ACC.D0638.10A

DUMBBELL SPECIMEN DIE FOR PLASTIC SPECIMENS TYPE

 I, II, III, IV, V


                                    

         Product Literature             


ASTM.D0695.10

COMPRESSION ANTI-BUCKLING FIXTURE  


                                                                       

         Product Literature                                              Drawing


ASTM.D0695.11

COMPRESSION ANTI-BUCKLING FIXTURE (CS)


                                                                       

         Product Literature                                              Drawing


ASTM.D0695.20

COMPRESSION SUBPRESS FOR AXIAL COMPRESSION (SS)


                                                                       

         Product Literature                                              Drawing


ASTM.D0695.21

COMPRESSION SUBPRESS FOR AXIAL COMPRESSION (CS)


                                                                       

         Product Literature                                              Drawing


ASTM.D0732.10

1” DIAMETER  PUNCH SHEAR FIXTURE (CS)


                                                                       

         Product Literature                                              Drawing


ASTM.D0732.11

1” DIAMETER  PUNCH SHEAR FIXTURE (SS)


                                                                       

         Product Literature                                              Drawing


ASTM.D0751.30

BURST STRENGTH FIXTURE FOR COATED FABRICS


                                                                      

         Product Literature                                             Drawing


ASTM.D0790.10

2" WIDE - THREE POINT FLEXURE FIXTURE  FOR UP TO 12" SPANS (SS)


                                                                       

         Product Literature                                              Drawing


ASTM.D0790.11

FOUR POINT FLEXURE FIXTURE 12” SPAN - 2” WIDE - PIN SUPPORTS CENTER FINDING SCALES


                                                                       

         Product Literature                                              Drawing


ASTM.D0790.20

THREE AND FOUR POINT FLEXURE FIXTURE 12” SPAN - 2” WIDE - PIN SUPPORTS CENTER FINDING SCALES


                                                                       

         Product Literature                                              Drawing


ASTM.D0790.30

THREE AND FOUR POINT FLEXURE FIXTURE 24” SPAN - 2” WIDE - PIN SUPPORTS CENTER FINDING SCALES


                                                                       

         Product Literature                                              Drawing


ASTM.D0882.10

THIN SHEET TENSILE LINE GRIPS (AL)


                                                         

         Product Literature                                     


ACC.D0882.10A

RECTANGULAR SPECIMEN DIE FOR THIN PLASTIC SHEETING


                                                         

         Product Literature                                     


ASTM.D0897.10

TENSILE FLATWISE LOADING FIXTURE (CS) WITH FIVE SETS OF 1" ROUND (AL) LOADING BLOCKS


                                                                       

         Product Literature                                              Drawing


ASTM.D0905.10

WOOD ADHESIVE SHEAR TEST FIXTURE


                                                                       

         Product Literature                                              Drawing


ASTM.D0906.10

WOOD ADHESIVE SHEAR TEST FIXTURE


                                                                       

         Product Literature                                              Drawing


ASTM.D0952.11

2" SQUARE FLATWISE TENSION LOADING FIXTURE - UNIVERSAL JOINT TYPE WITH 5 SETS OF BONDING  BLOCKS


                                                                       

         Product Literature                                              Drawing


ASTM.D0953.12

BEARING STRENGTH FIXTURE SET


                                    

         Product Literature             


ASTM.D1002.30

METAL TO METAL LAP SHEAR SPECIMEN FABRICATION FIXTURE (SS)


                                                         

         Product Literature              Video                      Drawing


ASTM.D1037.10

WOOD THREE POINT FLEXURE FIXTURE


                                                                       

         Product Literature                                              Drawing


ASTM.D1037.20

LATERAL NAIL MOVEMENT TEST FIXTURE


                                                                       

         Product Literature                                              Drawing

  

ASTM.D1037.21

NAIL WITHDRAWAL TEST FIXTURE


                                    

         Product Literature         


ASTM.D1037.22

NAIL WITHDRAWAL TEST FIXTURE STAND ALONE UNIT


                                 

         Product Literature            

ASTM.D1037.31

WOOD TENSION PERPENDICULAR TO SURFACE FIXTURE


                                                                       

         Product Literature                                              Drawing


ASTM.D1037.50

MODIFIED JANKA BALL HARDNESS TEST FIXTURE WITH DIAL GAGE ATTACHMENT (11.3MM DIA. NOSE)


                                                         

         Product Literature              Video                      Drawing


ASTM.D1037.51

MODIFIED JANKA BALL HARDNESS TEST FIXTURE WITH DIAL GAGE ATTACHMENT (10MM DIA. NOSE)


                                                         

         Product Literature              Video                      Drawing


ASTM.D1037.70

WOOD INTERLAMINAR SHEAR FIXTURE (COMPRESSION MODE)


                                                                       

         Product Literature                                              Drawing


ASTM.D1037.80

WOOD EDGEWISE SHEAR (TWO RAIL) FIXTURE COMPRESSION MODE


                                                                       

         Product Literature                                              Drawing


ASTM.D1037.85

COMPRESSION-SHEAR TEST METHOD


                                                         

         Product Literature              Video                      Drawing


ASTM.D1062.10

CLEAVAGE STRENGTH OF METAL TO METAL ADHESIVE BONDS (SS)


                                                                       

         Product Literature                                              Drawing


ASTM.D1062.11

CLEAVAGE STRENGTH OF METAL TO METAL ADHESIVE BONDS (CS)


                                                                       

         Product Literature                                              Drawing


ASTM.D1230.10

90° CONSTANT ANGLE PEEL FIXTURE (5" BY 12" SPECIMENS) WITH 5 ALUMINUM Q-PANEL BONDING PLATES


                                                                       

         Product Literature                                              Drawing

 

ASTM.D1414.10

TENSILE TESTING GRIPS FOR RUBBER RING SPECIMENS (SELF ROTATING SHAFTS)


                                                                       

         Product Literature                                              Drawing


ASTM.D1414.11

TENSILE TESTING GRIPS FOR RUBBER RING SPECIMENS (MOTORIZED ROTATING SHAFTS)


                                                                     

         Product Literature                                            Drawing


ASTM.D1414.20

COMPRESSION SET FIXTURE UNDER CONSTANT DEFORMATION


                                                                       

         Product Literature                                              Drawing


ASTM.D1593.10

THIN SHEET TENSILE LINE GRIPS (AL)


                                                                       

         Product Literature                                              Drawing


ASTM.D1593.11

DROP ARM IMPACTER FOR RIGID VINYL AT LOW-TEMPERATURES


                                                         

         Product Literature              Video                      Drawing


ASTM.D1621.10

RIGID CELLULAR PLASTICS COMPRESSION TEST FIXTURE


                                                                       

         Product Literature                                              Drawing


ASTM.D1623.10

CONICAL SHAPED TENSILE GRIPS

FOR RIGID CELLULAR PLASTIC (TYPE A)


                                                                       

         Product Literature                                              Drawing


ASTM.D1623.20

FLATWISE TENSION FIXTURE WITH 5 SETS OF 1” SQUARE  BONDING BLOCKS


                                                                        

         Product Literature                                              Drawing


ASTM.D1623.22

FLATWISE TENSION FIXTURE WITH 5 SETS OF 1" ROUND BONDING BLOCKS


                                                                       

         Product Literature                                              Drawing


ASTM.D1623.30

FLATWISE TENSION FIXTURE WITH 5 SETS OF 2" SQUARE BONDING BLOCKS


                                                                       

         Product Literature                                              Drawing


ASTM.D1693.10

ENVIRONMENTAL STRESS-CRACKING

OF ETHYLENE PLASTICS KIT


                                    

         Product Literature              


ASTM.D1693.10.A

ACCESSORIES FOR ASTM.D1693.10 - ENVIRONMENTAL STRESS-CRACKING OF ETHYLENE PLASTICS


                                    

         Product Literature            


ASTM.D1709.10

FREE FALLING DART IMPACTER FOR IMPACT RESISTANCE OF PLASTIC FILM


                                                         

        Product Literature             Video                       Drawing    


ASTM.D1781.11

CLIMBING DRUM PEEL FIXTURE WITH ROLLER TYPE GRIPS


                                                                       

         Product Literature                                              Drawing


ASTM.D1781.12

CLIMBING DRUM PEEL FIXTURE WITH FLAT FACED GRIPS


                                                                       

         Product Literature                                              Drawing


ASTM.D1781.13

CLIMBING DRUM PEEL FIXTURE WITH FLAT FACED GRIPS (HIGH TEMPERATURE)


                                                                       

         Product Literature                                              Drawing


ASTM.D1790.10

IMPACTER FOR BRITTLENESS OF PLASTIC SHEETING


                                                         

         Product Literature              Video                      Drawing


ASTM.D1894.10

HORIZONTAL PLANE COEFFICIENT OF FRICTION FIXTURE


                                                         

         Product Literature              Video                      Drawing


ASTM.D1894.11

INCLINE PLANE COEFFICIENT OF FRICTION FIXTURE


                                                                       

         Product Literature                                              Drawing


ASTM.D2105.10

LONGITUDINAL TENSILE TEST FIXTURE ASSEMBLY FOR FIBERGLASS PIPE


                                                                       

         Product Literature                                              Drawing


ASTM.D2136.10

LOW TEMPERATURE BENDING JIG TEST FIXTURE FOR COATED FABRICS


                                                                       

         Product Literature                                              Drawing


ASTM.D2256.10

4" DIAMETER CAPSTAN STYLE TENSILE GRIPS FOR YARN (CS)


                                                                       

         Product Literature                                              Drawing


ASTM.D2290.10

SPLIT DISK FIXTURE FOR  COMPOSITE MATERIALS


                                                                       

         Product Literature                                              Drawing


ASTM.D2290.20

SPLIT DISK FIXTURE FOR PLASTIC MATERIALS


                                                                       

         Product Literature                                              Drawing


ASTM.D2290.21

SPLIT DISK FIXTURE FOR PLASTIC MATERIALS


                                                                       

         Product Literature                                              Drawing


ASTM.D2290.30

HIGH STRENGTH (SMALLER DIAMETER) SPLIT DISK FIXTURE FOR PLASTIC MATERIALS


                                                                       

         Product Literature                                              Drawing


ASTM.D2290.50

HIGH STRENGTH SPLIT DISK FIXTURE FOR PLASTIC MATERIALS (4”- 12” DIAMETER)


                                                         

         Product Literature              Video                      Drawing


ASTM.D2290.51

HIGH STRENGTH SPLIT DISK FIXTURE FOR PLASTIC MATERIALS (4”- 18” DIAMETER)


                                                         

         Product Literature              Video                      Drawing


ASTM.D2290.52

HIGH STRENGTH SPLIT DISK FIXTURE FOR PLASTIC MATERIALS (8” DIAMETER AND UP)


                                                         

         Product Literature              Video                      Drawing


ASTM.D2344.10

SHORT BEAM SHEAR AND THREE POINT FLEXURE FIXTURE

(ADJUSTABLE SUPPORTS)


                                                                       

         Product Literature                                              Drawing


ASTM.D2344.11

SHORT BEAM SHEAR AND THREE POINT FLEXURE FIXTURE

(LEAD SCREW SUPPORT) ACCESSORIES


                                                                       

         Product Literature                                              Drawing


ASTM.D2344.17

SHORT BEAM SHEAR AND THREE POINT FLEXURE FIXTURE

HIGH CAPACITY


                                                                       

         Product Literature                                              Drawing


ASTM.D2444.20

DROP WEIGHT IMPACT OF CYLINDRICAL STRUCTURAL MEMBERS AND PIPING SECTION


                                                         

         Product Literature              Video                      Drawing


ASTM.D2559.10

WOOD ADHESIVE SHEAR TEST FIXTURE


                                                                       

         Product Literature                                              Drawing


ASTM.D2594.10

HANGER ASSEMBLY FOR STRETCH PROPERTIES OF KNITTED FABRICS (CS)


                                                                       

         Product Literature                                              Drawing


ASTM.D2718.10

PLYWOOD LARGE PANEL FLATWISE SHEAR TEST FIXTURE


                                                                       

         Product Literature                                              Drawing


ASTM.D2718.20

PLYWOOD LARGE PANEL  FLEXURAL TEST FIXTURE


                                                                       

         Product Literature                                              Drawing


ASTM.D2719.10

PLYWOOD SMALL PANEL-SHEAR TEST FIXTURE


                                                                       

         Product Literature                                              Drawing


ASTM.D2719.11

PLYWOOD LARGE PANEL-SHEAR TEST FIXTURE


                                                                       

         Product Literature                                              Drawing


ASTM.D2719.20

TWO RAIL SHEAR TEST FIXTURE PLYWOOD LARGE PANELS


                                                                       

         Product Literature                                              Drawing


ASTM.D2861.10

90° CONSTANT ANGLE PEEL FIXTURE


                                                                       

         Product Literature                                              Drawing


ASTM.D2861.20

PEEL STRENGTH FIXTURE FOR FILM COMPOSITES


                                                                       

         Product Literature                                              Drawing


D2990.12-DB4.png

ASTM.D2990.12

TENSILE CREEP TESTING STAND - 5,000 LBS CAPACITY - 10 TO 1 MULTIPLIER


                                                                      

         Product Literature                                             Drawing


ASTM.D2990.13

(6) POSITION TENSILE CREEP STAND, LOW CAPACITY, HIGH ELONGATION, ROOM  


                                                                      

         Product Literature                                             Drawing


ASTM.D2990.16

3 POSITION DEAD WEIGHT TENSILE CREEP STAND


                                                                        

                                                     Video                       

ASTM.D2990.21

THREE POINT FLEXURAL CREEP STAND


                                                         

         Product Literature              Video                      Drawing


ASTM.D2990.22

(6) POSITION MULTI-PURPOSE CREEP TESTING STAND- DEAD WEIGHT (FLEXURE  ELEVATED TEMP)


                                

         Product Literature            


ASTM.D2990.23

(6) POSITION FLEXURE CREEP STAND, LOW CAPACITY, LIQUID


                                  

         Product Literature         

  

ASTM.D2990.24

(6) POSITION FLEXURE CREEP TESTING STAND, 4 TO 1 MULTIPLIER


                                                                      

         Product Literature                                              Drawing


ASTM.D2990.30

15 TO 1 MULTIPLIER - SINGLE POSITION COMPRESSION WITH CIRCULATING BATH - 1000 LBS


                                                                       

         Product Literature                                              Drawing


ASTM.D2990.90

DEAD LOADING WEIGHTS


                                    

         Product Literature             


ASTM.D3039.10

20,000 LBS WEDGE ACTION GRIPS FOR SPECIMENS UP TO 2" WIDE OR 3/4" ROUND


                                                         

         Product Literature              Video                      Drawing


ASTM.D3043.10

4.5" WIDE, 24" ADJUSTABLE SPAN, THREE POINT ARTICULATING BENDING TEST FIXTURE (CS)


                                                                     

         Product Literature                                            Drawing


ASTM.D3043.12

120” STATIC BEND FIXTURE FOR WOOD SUBSTRATES


                                    

         Product Literature            


ASTM.D3121.10

ROLLING BALL TACK TESTER


                                                                       

         Product Literature                                              Drawing


ASTM.D3167.10

FLOATING ROLLER PEEL RESISTANCE FIXTURE (7/8" WIDE SPECIMEN)


                                                                       

         Product Literature                                              Drawing


ASTM.D3167.11

FLOATING ROLLER PEEL RESISTANCE FIXTURE (1.5" WIDE SPECIMEN)


                                                                       

         Product Literature                                              Drawing


ASTM.D3167.13

FLOATING ROLLER PEEL RESISTANCE FIXTURE (10" WIDE SPECIMEN)


                                                                       

         Product Literature                                              Drawing


ASTM.D3330.10

180° PEEL TEST FIXTURE FOR SMALL SPECIMENS UP TO 2" WIDE AND 9" LONG


                                                                      

         Product Literature                                             Drawing


ASTM.D3330.11

180° VARIABLE ANGLE PEEL TEST FIXTURE FOR SPECIMENS UP TO  2” WIDE AND 9” LONG


                                                         

         Product Literature             Video                      Drawing


ASTM.D3354.10

PARALLEL PLATE TEST FIXTURE FOR PLASTIC FILM


                                                                       

         Product Literature                                              Drawing


ASTM.D3410.15

MODIFIED CELANESE COMPRESSION LOADING FIXTURE - PART A (CS)


                                                         

       Product Literature           Specimen                    Drawing


ASTM.D3410.16

MODIFIED CELANESE COMPRESSION LOADING FIXTURE - PART A (SS)


                                                         

        Product Literature          Specimen                    Drawing


ASTM.D3410.20

IITRI COMPRESSION LOADING FIXTURE - UP TO 1” WIDE AND UP TO 0.6” THICK SPECIMENS


                                                         

         Product Literature             Video                     Drawing


ASTM.D3410.25

IITRI COMPRESSION LOADING FIXTURE - UP TO 2" WIDE AND UP TO 0.75" THICK SPECIMENS (SS)


                                                         

         Product Literature             Video                      Drawing


ASTM.D3433.10

DOUBLE-CANTILEVER BEAM SPECIMEN LOADING CLEVIS SET


                                                                       

         Product Literature                                              Drawing


ASTM.D3535.10

COMPRESSION TYPE DEFORMATION TEST FIXTURE


                                                                       

         Product Literature                                              Drawing


ASTM.D3787.11

BURST STRENGTH FIXTURE FOR KNITTED GOODS WITH A PNEUMATIC CYLINDER AND VALVE


                                                                       

         Product Literature                                              Drawing


ASTM.D3846.10

COMPRESSION ANTI-BUCKLING FIXTURE


                                                                       

         Product Literature                                              Drawing


ASTM.D3916.10

SPECIMEN CLAMPING PLATE SET (0” - 1/4”)


                                                                       

         Product Literature                                              Drawing


ASTM.D3916.11

SPECIMEN CLAMPING PLATE SET(1/2” TO 3/4”)


                                                                       

         Product Literature                                              Drawing


ASTM.D3916.12

SPECIMEN CLAMPING PLATE SET (7/8” TO 1”)


                                                                       

         Product Literature                                              Drawing


ASTM.D3929.10

THREE POINT STRESS CRACKING BY BENDING BEAM FIXTURE


                                                                       

         Product Literature                                              Drawing


ASTM.D3931.10

COMPRESSION LOADING SHEAR FIXTURE WITH SELF-ADJUSTING BEARING (CS)


                                                                       

         Product Literature                                              Drawing


ASTM.D3950.20

OFFSET, SPLIT DRUM STYLE CAPSTAN GRIP SET FOR BREAKING STRENGTH OF TEXTILES


                                                                       

         Product Literature                                              Drawing


ASTM.D3950.30

10,000 LBS TITAN SERIES WEDGE ACTION GRIPS FOR SPECIMENS UP TO 1” WIDE OR 3/4” ROUND


                                                         

         Product Literature              Video                      Drawing


ASTM.D4255.10

TWO RAIL SHEAR FIXTURE TENSILE MODE (SS)


                                                                       

         Product Literature                                              Drawing


ASTM.D4255.11

TWO RAIL SHEAR FIXTURE COMPRESSION MODE (SS)


                                                                       

         Product Literature                                              Drawing


ASTM.D4255.12

TWO RAIL SHEAR FIXTURE TENSILE MODE (CS)


                                                                       

         Product Literature                                              Drawing


ASTM.D4255.13

TWO RAIL SHEAR FIXTURE COMPRESSION MODE (CS)


                                                                       

         Product Literature                                              Drawing


ASTM.D4255.30

THREE RAIL SHEAR FIXTURE COMPRESSION MODE (SS)


                                                                       

         Product Literature                                              Drawing


ASTM.D4475.10

SHORT BEAM FLEXURE FIXTURE FOR PROTRUDED REINFORCED PLASTIC


                                                                       

         Product Literature                                              Drawing


ASTM.D4476.10

FLEXURE FIXTURE FOR FIBER REINFORCED PROTRUDED PLASTIC


                                                                       

         Product Literature                                              Drawing


ASTM.D4501.10

BLOCK SHEAR TEST FIXTURE (CS)


                                                                       

         Product Literature                                              Drawing


ASTM.D4502.10

COMPRESSION LOADING SHEAR FIXTURE WITH SELF-ADJUSTING BEARING (CS)


                                                                       

         Product Literature                                              Drawing


ASTM.D4595.13

9" WIDE DOUBLE WEDGE GRIP SET (CS) NON DRUM TYPE


                                                                       

         Product Literature                                              Drawing


ASTM.D4632.10

3” WIDE 10,000 LBS THICK RUBBER WEDGE ACTION GRIPS


                                                                       

         Product Literature                                              Drawing


ASTM.D4649.10

PROTRUSION PUNCTURE FIXTURE (COMPRESSION MODE) (AL)


                                                         

         Product Literature              Video                      Drawing


ASTM.D4762.00

POLYMER MATRIX COMPOSITE MATERIALS


     


ASTM.D4884.10

9" WIDE DOUBLE WEDGE GRIP SET (CS) NON DRUM TYPE


                                                                       

         Product Literature                                              Drawing


ASTM.D4885.10

9" WIDE DOUBLE WEDGE GRIP SET (CS) NON DRUM TYPE


                                                                       

         Product Literature                                              Drawing


ASTM.D5041.10

CLEAVAGE FRACTURE STRENGTH TEST FIXTURE (SS)


                                                                       

         Product Literature                                              Drawing


ASTM.D5045.20

THREE POINT FLEXURE FIXTURE (CS)


                                                                       

         Product Literature                                              Drawing


ASTM.D5045.XX

COMPACT TENSION CLEVIS GRIP SET (SS)


                                                                       

         Product Literature                                              Drawing


ASTM.D5083.10

20,000 LBS WEDGE ACTION GRIPS FOR SPECIMENS UP TO 2" WIDE OR 3/4" ROUND


                                                         

         Product Literature              Video                      Drawing


ASTM.D5262.10

9" WIDE DOUBLE WEDGE GRIP SET (CS) NON DRUM TYPE


                                                                       

         Product Literature                                              Drawing


ASTM.D5378.10

200 LBS SCREW ACTION TENSILE GRIPS


                                                                       

         Product Literature                                              Drawing


ASTM.D5378.30

BURST STRENGTH TEST FIXTURE (AL)


                                                                       

         Product Literature                                              Drawing


ASTM.D5379.13

V-NOTCHED BEAM (IOSIPESCU SHEAR) FIXTURE - ADJUSTABLE WEDGES STYLE (SS)


                                                                       

         Product Literature                                              Drawing


ASTM.D5379.16

IOSIPESCU SHEAR FIXTURE COMPRESSION MODE (CS)


                                                                       

         Product Literature                                              Drawing


ASTM.D5448.20

IN-PLANE SHEAR FIXTURE INCLUDING END LOADING CAP SET AND INNER AND OUTER SHELLS


                                                                       

         Product Literature                                              Drawing


ASTM.D5449.10

TRANSVERSE COMPRESSION FIXTURE


                                                                       

         Product Literature                                              Drawing


ASTM.D5450.10

TRANSVERSE TENSILE FIXTURE


                                                                       

         Product Literature                                              Drawing


ASTM.D5467.10

SANDWICH BEAM FLEXURE FIXTURE WITH LOADING PADS AND  UP TO 24” SPANS (CS)


                                                                       

         Product Literature                                              Drawing


ASTM.D5494.10

PYRAMID PROTRUSION PUNCTURE FIXTURE (SS) WITH ELECTRICAL PENETRATION SENSOR


                                                                       

         Product Literature                                              Drawing


ASTM.D5528.10

5 SETS OF STAINLESS STEEL PIANO HINGES


                                                                       

         Product Literature                                              Drawing


ASTM.D5528.20

CLEVIS TYPE YOKE SET WITH 5 SETS OF ALUMINUM LOADING BLOCKS


                                                                       

         Product Literature                                              Drawing


ASTM.D5572.10

24” FOUR POINT FLEXURE FIXTURE FOR FEATHERED WOODEN JOINTS (SS)


                                                                       

         Product Literature                                              Drawing


ASTM.D5635.10

DYNAMIC PUNCTURE RESISTANCE OF ROOFING MEMBRANE TEST FIXTURE


                                                                       

         Product Literature                                             


ASTM.D5748.10

PROTRUSION PUNCTURE FIXTURE WITH TEFLON COATED PROBE  (AL)


                                                         

         Product Literature              Video                      Drawing


ASTM.D5748.19

PROTRUSION PUNCTURE FIXTURE WITH TEFLON COATED PROBE  (SS)


                                                         

         Product Literature              Video                      Drawing


ASTM.D5751.10

COMPRESSION LOADING SHEAR FIXTURE WITH SELF-ALIGNING BEARING (CS)


                                                                       

         Product Literature                                              Drawing


ASTM.D5766.15

20,000 LBS WEDGE ACTION GRIPS FOR SPECIMENS UP TO 2" WIDE OR 3/4" ROUND


                                                         

         Product Literature              Video                      Drawing


ASTM.D5961.10

DOUBLE SHEAR BEARING STRENGTH TEST FIXTURE  - PROCEDURE A (SS)


                                                                       

         Product Literature                                              Drawing

 

ASTM.D5961.11

DOUBLE SHEAR BEARING STRENGTH TEST FIXTURE  - PROCEDURE A (CS)


                                                                       

         Product Literature                                              Drawing


ASTM.D5961.30

SINGLE SHEAR OPEN HOLE BEARING STRENGTH TEST FIXTURE - PROCEDURE B (SS)


                                                                       

         Product Literature                                              Drawing


ASTM.D5961.31

SINGLE SHEAR OPEN HOLE BEARING STRENGTH TEST FIXTURE - PROCEDURE B (CS)


                                                                       

         Product Literature                                              Drawing


ASTM.D5961.40

SINGLE SHEAR BEARING STRENGTH TENSION TEST FIXTURE - PROCEDURE C (SS)


                                                                       

         Product Literature                                              Drawing



ASTM.D5961.50

DOUBLE SHEAR COMPRESSION TEST FIXTURE


                                                                       

         Product Literature                                              Drawing


ASTM.D6109.14

60" ADJUSTABLE FLATWISE FOUR POINT FLEXURE FIXTURE (CS)


                                    

         Product Literature           


ASTM.D6115.10

PIANO HINGED BONDED LOADING TAB SET (SS)


                                                                       

         Product Literature                                              Drawing


ASTM.D6115.20

CLEVIS TYPE YOKE SET WITH 5 SETS OF ALUMINUM LOADING BLOCKS


                                                                       

         Product Literature                                              Drawing


ASTM.D6147.10

SHAWBERRY - WALLACE STRESS RELAXATION FIXTURE


                                                                       

         Product Literature                                              Drawing


ASTM.D6195.11

GRIP MOUNTING HORIZONTAL PLANE WITH RAISED CONTACT AREA  -  METHOD "A "


                                                                       

         Product Literature                                              Drawing


ASTM.D6241.10

STATIC PUNCTURE STRENGTH TEST FIXTURE


                                                         

         Product Literature              Video                      Drawing


ASTM.D6264.10

QUASI-STATIC INDENTATION TEST FIXTURE


                                                                       

         Product Literature                                              Drawing


ASTM.D6272.10

12" SPAN, FOUR POINT FLEXURE FIXTURE FOR SPECIMENS UP TO 2" WIDE (SS)


                                                                       

         Product Literature                                              Drawing


ASTM.D6415.10

FOUR POINT BEND FIXTURE FOR COMPOSITE CURVED BEAMS (SS)


                                                                       

         Product Literature                                               Drawing


ASTM.D6415.11

FOUR POINT BEND FIXTURE FOR COMPOSITE CURVED BEAMS (CS)


                                                                       

         Product Literature                                              Drawing


ASTM.D6464.10

FLATWISE TENSION FIXTURE WITH LOADING YOKE AND FLATWISE TENSILE GRIP


                                                                       

         Product Literature                                              Drawing

 

ASTM.D6464.20

SHEAR STRENGTH IN-PLANE LOADING FIXTURE (CS)


                                                                       

         Product Literature                                              Drawing


ASTM.D6479.13

EDGECOMB TEST FIXTURE (SS)


                                                                       

         Product Literature                                              Drawing


ASTM.D6484.10

OPEN HOLE COMPRESSION FIXTURE (SS)


                                                                       

         Product Literature                                              Drawing


ASTM.D6484.11

OPEN HOLE COMPRESSION FIXTURE (CS)


                                                                       

         Product Literature                                              Drawing


ASTM.D6641.10

COMBINED LOADING COMPRESSION (CLC) TEST FIXTURE (SS)


                                                                       

         Product Literature                                              Drawing


ASTM.D6641.11

COMBINED LOADING COMPRESSION (CLC) TEST FIXTURE (CS)


                                                                       

         Product Literature                                              Drawing


ASTM.D6671.10

MIXED MODE BENDING FIXTURE (AL AND SS) WITH FIVE  SETS OF SPECIMEN TABS


                                                                       

         Product Literature                                              Drawing


ASTM.D6671.11

MIXED MODE BENDING FIXTURE (SS) WITH FIVE SETS OF SPECIMEN TABS


                                                                       

         Product Literature                                              Drawing


ASTM.D6742.10

20,000 LBS WEDGE ACTION GRIPS FOR SPECIMENS UP TO 2" WIDE OR 3/4" ROUND


                                                         

         Product Literature              Video                      Drawing


ASTM.D6742.20

OPEN HOLE COMPRESSION FIXTURE (SS)


                                                                       

         Product Literature                                              Drawing


ASTM.D6742.21

OPEN HOLE COMPRESSION FIXTURE (CS)


                                                                       

         Product Literature                                              Drawing


ASTM.D6775.10

OFFSET, SPLIT DRUM STYLE CAPSTAN GRIP SET FOR BREAKING STRENGTH OF TEXTILES


                                                                       

         Product Literature                                              Drawing


ASTM.D6797.10

BURST STRENGTH TEST FIXTURE (SS)


                                                                       

         Product Literature                                              Drawing


ASTM.D6862.10

90° CONSTANT ANGLE PEEL FIXTURE FOR 2” x 9” SPECIMENS WITH 5 ALUMINUM Q-PANEL BONDING PLATES


                                                                       

         Product Literature                                              Drawing


ASTM.D6873.10

DOUBLE SHEAR BEARING STRENGTH TEST FIXTURE (SS)


                                                                       

         Product Literature                                              Drawing


ASTM.D6873.11

DOUBLE SHEAR BEARING STRENGTH TEST FIXTURE (CS)


                                                                       

         Product Literature                                              Drawing


ASTM.D6873.20

SINGLE SHEAR OPEN HOLE BEARING STRENGTH TEST FIXTURE (SS)


                                                                       

         Product Literature                                              Drawing


ASTM.D6873.21

SINGLE SHEAR OPEN HOLE BEARING STRENGTH TEST FIXTURE (CS)


                                                                       

         Product Literature                                              Drawing


ASTM.D7078.10

V-NOTCHED RAIL SHEAR TEST FIXTURE (SS)


                                                         

         Product Literature              Video                      Drawing


ASTM.D7078.11

V-NOTCHED RAIL SHEAR TEST FIXTURE (CS)


                                                         

         Product Literature              Video                      Drawing


ASTM.D7136.10

500 IN-LBS DROP WEIGHT IMPACTER


                                                                       

         Product Literature                                              Drawing


ASTM.D7137.10

COMPRESSION AFTER IMPACT TEST FIXTURE (SS)


                                                                       

         Product Literature                                              Drawing


ASTM.D7137.11

COMPRESSION AFTER IMPACT TEST FIXTURE (CS)


                                                                       

         Product Literature                                              Drawing


ASTM.D7205.10

20,000 LBS WEDGE ACTION GRIPS FOR SPECIMENS UP TO 2" WIDE OR 3/4" ROUND


                                                         

         Product Literature              Video                      Drawing


ASTM.D7248.10

DOUBLE SHEAR FASTENER TEST FIXTURE  - PROCEDURE A (SS)


                                                                       

         Product Literature                                              Drawing


ASTM.D7248.20

SINGLE SHEAR OPEN HOLE BEARING STRENGTH TEST FIXTURE (SS)


                                                                       

         Product Literature                                              Drawing


ASTM.D7248.21

SINGLE SHEAR OPEN HOLE BEARING STRENGTH TEST FIXTURE (CS)


                                                                       

         Product Literature                                              Drawing


ASTM.D7249.10

24" SPAN SANDWICH LONG BEAM  3 AND 4 POINT FLEXURE FIXTURE FOR UP TO 4” WIDE (CS)


                                                                       

         Product Literature                                              Drawing


ASTM.D7250.10

24" SPAN SANDWICH LONG BEAM  3 AND 4 POINT FLEXURE FIXTURE FOR UP TO 4” WIDE (CS)


                                                                       

         Product Literature                                              Drawing


ASTM.D7264.10

24" SPAN THREE & FOUR POINT FLEXURE FIXTURE FOR UP TO 2" WIDE (SS)


                                                                       

         Product Literature                                              Drawing


ASTM.D7291.10

FLATWISE TENSION FIXTURE WITH 1" ROUND THREADED BONDING BLOCKS


                                                                       

         Product Literature                                              Drawing


ASTM.D7332.10

FASTENER PULL-THROUGH TEST FIXTURE - PROCEDURE A (SS)


                                                                      

         Product Literature                                             Drawing


ASTM.D7332.22

FIVE ENGLISH SIZE FASTENER PULL-THROUGH TEST FIXTURE - PROCEDURE B (CS)


                                                         

         Product Literature              Video                      Drawing


ASTM.D7332.23

FIVE METRIC SIZES FASTENER PULL-THROUGH TEST FIXTURE - PROCEDURE B (CS)


                                                         

         Product Literature              Video                      Drawing


ASTM.D7336.10

6" DIAMETER PLATEN SET WITH A SELF-ALIGNING SPHERICAL SEAT AND A FIXED COMPRESSION PLATEN


                                                                       

         Product Literature                                              Drawing


ASTM.D7336.11

6' DIAMETER COMPRESSION PLATEN WITH 12" LONG SUPPORT CYLINDER FOR LVDT TESTING (LVDT NOT INCLUDED)


                                                                       

         Product Literature                                              Drawing


ASTM D STANDARD